Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. More Material , does not use LED indicators or key fobs and is hidden within the vehicle's wiring.
It also allows the user to turn off the system temporarily by using Transport Mode for when they are renting their vehicle. This guide will guide you through the process of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle against hacking, key cloning and relay attacks. The system is linked directly to the ECU of your car and protected by a pin code you select. It is inaccessible to thieves using diagnostic scanners and other advanced methods. It cannot be disabled with circuit cuts.
The system is easy to use, however it's important to have professional installation to ensure a clean and secure connection to your vehicle's ECU. An approved installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking system or alarm system to complete your vehicle's security package.
To avoid an accidental deployment of short circuits or airbags To avoid an accidental deployment of airbags or short circuits, the installer must disconnect your battery. Once this is done, the installer can safely begin work. Basic hand tools can be used for precise connections. A multimeter is useful to test electrical values. Cable tie and insulation tape are crucial to ensure connections are secure and ensure that wiring is neat. The Ghost Immobiliser user's guide will provide specific guidelines specific to your particular model.
During the installation process, it's essential to choose an area for grounding that is free of any paint or debris. Installers should also ensure that the immobiliser's wires, CAN H and can L are connected to the appropriate ECU ports. The wires can be connected or soldered depending on the model. To ensure a stable and long-lasting connection, it is recommended that you choose a high-quality plug.
Once the installation is complete After the installation is complete, the customer can turn on after the installation is complete, the customer can activate Transport Mode. This allows the vehicle to be used by valet parking or mechanics without having to know the pin code. The customer must press the service icon on the dashboard five times within two seconds. The system will confirm this by showing five indicators.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's a smart choice for anyone who frequently rents out their cars on platforms like Turo. Immobilisers can lower insurance rates, as it lowers the chance of theft.
Getting Started
If you are looking for a solution to secure your vehicle from thieves, you can't go wrong with an autowatch ghost immobiliser. The device protects your vehicle from starting even the theft or copies the key. It's possible due to its advanced technology that prevents the engine from starting until the right PIN code is entered.
The device connects to the vehicle's CAN bus network which allows it to communicate with the ECU directly. It uses buttons that are already present on the dashboard and the steering wheel to create a unique sequence that only you know which makes it impossible for anyone else to start your car. This is the best way to protect your pride and joy. It will keep its value intact in the event that you decide to sell it.
Installing a ghost immobiliser can be an easy procedure, but it is crucial to follow the steps carefully to avoid issues with electricity and system malfunctions. First, you must locate and determine a constant 12V power source and an adequate grounding point on the vehicle's chassis. After that, you can begin connecting the wires for the immobiliser. Be sure to use high-quality connectors and soldering methods to ensure a solid connection. Connect the connections with heat shrink tubing or insulation tape, or other materials to prevent short circuits of electricity.
After the wires are connected, you can connect the battery and begin the engine to check whether the immobiliser works. Once everything is working properly then you can put it in a secure location under the dash or somewhere else in the vehicle. Be sure to cover it well to prevent a thief from tampering with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified This means it meets the highest standards of security and is an excellent protection against car thieves. It offers superior protection against key cloning, hacking and relay attacks. It isn't able to be disabled unless you know the code. The device is simple to use, and it can be set into an option for a service valet so that your vehicle will not be activated when you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system specifically designed to deter theft of vehicles. It communicates with your vehicle's ECU and connects directly to its CAN bus. The Ghost Immobiliser does not interfere with the factory settings of your car, unlike other aftermarket systems that require the removal of circuit elements.
The system is also inaccessible by thieves using diagnostic scanning tools. The system doesn't transmit or receive radio frequency signals and instead uses CAN data for communication with your ECU. It doesn't require any modifications to your current key fobs.
Enter your disarm sequence (either two or one button) and then switch on the ignition of your vehicle to activate Ghost Immobiliser. The indicator will flash twice to verify that you have entered the correct code. Once you've verified this, you're able to start your vehicle and drive off with peace of mind.
Once installed, the Ghost Immobiliser will protect your car from hacking and key cloning, while protecting the value of your most prized possession. If you have to surrender your car for service or valet parking The Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete the Ghost Immobiliser installation, you'll have to find the source of power that is constant (12V) and a grounding point. Make sure that both are well-insulated and able to be touched. It's also recommended to use cable ties to tie and secure the wires, as this reduces the risk of tampering by potential thieves. Make sure you verify the position of these points to avoid committing a mistake, and mark them with an adhesive or label. Examine every connection for signs that they're getting worn out. Be sure to ensure that all connections are in place and properly sealed. Don't forget to test your Ghost Immobiliser after installation has been completed. This will ensure that the unit is operating correctly and that all connections are safe and well-insulated. Make sure to address any problems immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that integrates seamlessly with your vehicle's ECU to stop unauthorized motor starting. Its cutting-edge technology protects your vehicle from hacking and key cloning along with other common methods employed by thieves to steal vehicles. The Ghost is a perfect complement to existing alarm and tracking systems to provide the most effective protection for your vehicle. The Ghost's unique features and secluded design make it a popular choice for car lovers and security-conscious drivers too.
It is essential to follow the steps of installation in order to ensure correct integration of the Ghost Immobiliser. Check the wiring diagram for the vehicle as it will help you locate and connect the wires. The next step is to determine the power and grounding sources. Once you've located them, you will be required to mark the points to make them easy to identify when installing. In addition, it is vital to use only the best tools and materials. Hand tools are a must to make precise connections, while a multimeter will confirm electrical values and guarantee safety. Insulation tape and cable ties will keep the connections neat and tidy. Finally, a user manual will provide specific instructions specifically tailored to your Ghost model.
Before beginning the installation it is essential to test the system by entering the PIN code and starting the vehicle. This step will confirm the immobiliser works as intended and will stop vehicle starts that are not authorized. This procedure should be carried out regularly as part your regular inspections of the vehicle to ensure the system is always working correctly.
After the installation has been completed, you can begin driving your vehicle with confidence. The Ghost will help keep your pride and joy safe from would-be thieves, ensuring that nobody can escape with your car without the proper PIN code. The Ghost can be paired with an approved Thatcham tracker that detects any attempts at theft or tampering. This will allow you to locate your car if it's stolen.
The Ghost is compatible with a variety of vehicles, including those from most major manufacturers. If you're looking to secure your vehicle with this innovative device, contact Monty's Locksmith today to find out more about our installation and maintenance options. We are a TASSA registered installer, which guarantees we follow strict standards in the installation of our products. This assures customers as well as insurance companies and law enforcement agencies that all installations are carried out safely and properly.