Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. It's discreet, does not use LED indicators or key fobs, and is hidden in the wiring of the vehicle.
The user may also turn off the system for a short period of time by using Transport Mode when renting out their vehicle. This guide will walk you through the installation process of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car against key hacking attacks, cloning and relay attacks. The system connects directly to your car's ECU and is secured by a unique PIN code that you choose. It's undetectable to thieves using diagnostic scanners or other advanced methods, and it is unable to be disabled by cutting circuits.
The system is simple to use, but it's essential to use a an expert installation to ensure a secure and secure connection to your vehicle's ECU. A Thatcham-approved installer can help in the installation and programming of your Ghost system. They can also suggest a tracking device or alarm system to complete your vehicle's protection package.
To prevent an accidental deployment of short circuits or airbags To avoid an accidental deployment of airbags or short circuits, the installer must remove your battery. After that, the installer can safely begin work. Hand tools are essential for securing connections with precision and a multimeter may be used to test electrical values and safety. Cable tie and insulation tape are vital to secure connections and ensure that wiring is neat. Lastly, the user manual gives specific guidelines that are specifically tailored to your Ghost Immobiliser model.
During the installation process, it's crucial to select a grounding point that's free of any paint or debris. The installer must be sure that the immobiliser's CAN H as well as CAN L wires are connected to the correct ports on the vehicle's ECU. The wires can be connected or soldered depending on the model. Using a quality connector is recommended to ensure a durable and secure connection.
Once the install is complete After the installation is complete, the customer can turn on Transport Mode. This allows valet parking or mechanics to access the vehicle without knowing the pin code. The user must press the icon for service on the dashboard five times over two seconds. After this is done the system will verify with 5 indication signals.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's a smart choice for anyone who frequently rents their vehicle on platforms such as Turo. Immobilisers can also lower insurance costs since it significantly decreases the risk of theft.
Getting Started
It's not difficult to come up with an autowatch ignition device if you want to protect your car from theft. The device stops your car from starting even if someone steals or copies your key. It is possible because of its advanced technology that stops the engine from starting until the correct PIN code has been entered.
The device connects to the vehicle's bus system CAN which allows direct communication with the ECU. It uses the buttons on your dashboard and steering to create a unique sequence, which only you are aware of. This makes it impossible for anyone else to start your vehicle. This is the ultimate system to safeguard your pride and joy. It will ensure that your car's value remains intact in the event that you decide to sell it.
Installing Ghost's immobiliser is straightforward however, you must follow the instructions to avoid electrical problems and system malfunctions. First, you must locate a 12V power supply and a good grounding on the car's chassis. Then, you'll be able to begin connecting the wires to the immobiliser. Use high-quality connectors, and soldering techniques for an effective connection. Insulate the connections using heat shrink tubing or insulation tape, as well as other materials to prevent electrical short circuits.
After the wires have been connected, you are able to reconnect the battery and start the engine to test the function of the immobiliser. When everything is functioning correctly then you can put it in a secure location under the dash or somewhere else in the vehicle. Make sure to cover it securely to ensure that thieves cannot get it into a compromising position.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified, which means that it complies with the highest standards of security and is an excellent protection against car thieves. It is invulnerable to key cloning and hacking and cannot be disabled without the code. The device is easy to use, and it can be set up to an option for a service valet so that your vehicle won't be activated when you take it for an MOT or service.
Wiring
The Ghost Immobiliser is a cutting-edge security system that's designed to stop theft of vehicles. It communicates with your vehicle's ECU and directly connects to the CAN bus. The Ghost Immobiliser does not interfere with the factory settings of your car unlike other aftermarket systems that require the removal of circuit elements.
It's also totally undetectable by thieves using diagnostic scanning devices. This is due to the fact that it does not transmit and receive radio frequency signals and it utilizes CAN data to communicate with your ECU. It doesn't require any modifications to your existing key fobs.
Enter the sequence to disarm (either two or one buttons) and then turn on the ignition of your car to activate the Ghost Immobiliser. The indicator will flash twice to verify that you have entered the correct code. After that, you are able to start your vehicle and leave with peace of mind.
Once installed, Ghost Immobiliser safeguards your vehicle against key cloning or hacking while protecting its value. In Transport Mode you can temporarily disable the Ghost Immobiliser when you need to give your car over for service or valet park.
To complete the Ghost Immobiliser installation, you'll have to locate a source of constant power (12V) and an earthing point. Make sure that both are well-insulated and can be touched. Cable ties are also recommended to secure the wires. This will reduce the possibility of theft by thieves. Be sure to double-check the location of these points to avoid making mistakes and mark them with a piece of tape or label. Check every connection for signs that they are wearing out. Connections that are loose can cause problems with the system, so be certain that they are securely in place and properly insulated. Finally, immobiliser ghost forget to test the Ghost Immobiliser after installation is completed. This will ensure that the unit is functioning properly, and that all connections are safe and well-insulated. If there are any issues, be certain to fix them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that is integrated into your car's ECU to prevent unauthorised engine start. The innovative technology it uses protects your vehicle from key cloning, hacking, and other common tactics that thieves employ to steal cars. The Ghost works in conjunction with existing alarm and tracking systems to offer the ultimate security for your car. The Ghost's unparalleled features and subtle design make it a popular option for car enthusiasts and security-conscious drivers too.
It is essential to follow the steps of installation in order to ensure proper integration of Ghost Immobiliser. The best way to begin is to look over the wiring diagram of your vehicle, which will serve as a roadmap for locating and connecting the necessary wires. You'll then need to identify the grounding and power sources. Once you've found them, you will be required to mark the points so that they are easily identifiable when installing. It is also essential to use high-quality tools and materials. Basic hand tools can help in making connections that are precise while a multimeter can verify electrical values and ensure safety. Cable ties and insulation tape can help keep connections tidy and neat. A Ghost-specific user's manual is also available.
Before beginning the installation it is important to test the system by entering the PIN code and then starting the vehicle. This test will verify that the immobiliser functions as intended and stop unauthorised vehicle starts. This step should be performed frequently as part of your regular vehicle inspections in order to ensure the system is always working correctly.
After the installation has been completed, you can start driving your vehicle with confidence. The Ghost will help keep your car and its contents secure from thieves who might steal it, ensuring that nobody can take off with your vehicle without the correct PIN. The Ghost can also be linked with a Thatcham-approved tracker to detect any attempt to steal or tamper that could lead to the location of your vehicle if it's stolen.
The Ghost can be utilized on a variety of vehicles and is compatible with all major brands. Monty's Locksmith can help you secure your vehicle using this cutting-edge device. Contact us today to learn more about our service and installation options. We are a TASSA Registered installer This certification ensures that we adhere to the strictest standards and procedures for installing our products. This assures customers insurance companies, customers, and law enforcement agencies that installations are performed safely and correctly.