Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN bus. It's discreet It does not include LED indicators or key fobs, and is hidden within the vehicle's wiring.
The user can also deactivate the system for a short period of time by using Transport Mode when renting out their car. This guide will walk you through the steps of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning attacks and relay attacks. The system is directly connected to your car's ECU and is secured by a unique PIN code that you choose. It is inaccessible to thieves using scanners for diagnostics or other modern methods, and it is unable to be disabled through circuit cuts.
The system is simple to use, however professional installation is advised to ensure a perfect connection with the ECU of your vehicle. A Thatcham-approved installer can help in the installation and programming of your Ghost system. They can also recommend an alarm or tracking system to complete the security package for your vehicle.
First, the installer needs to disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. When ghost immobiliser and tracker is disconnected, the installer may start working safely. Basic hand tools can be used to ensure precise connections. A multimeter is useful to verify electrical values. Insulation tape and cable ties are also vital for protecting connections and keeping wiring tidy. The user's manual offers specific instructions specifically tailored to your Ghost Immobiliser model.
During More Material , it is crucial to select an area for grounding that is free of paint and debris. The installer must ensure that the immobiliser's CAN H and CAN L wires are connected to the correct ports on your vehicle's ECU. Depending on the model, these wires might require soldering or plugged into. Using website -quality connector is recommended to ensure a long-lasting and reliable connection.
Transport Mode can be activated by the customer once the installation is completed. This permits mechanics or valet parking to access the vehicle without having to know the pin code. The customer must press the service icon on the dashboard five times in 2 seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA certified and Thatcham approved. It's a smart option for those who regularly rents out their cars through platforms such as Turo. An immobiliser can reduce insurance premiums, since it greatly reduces the chance of theft.
Getting Started
If you are looking for a solution that will protect your vehicle from thieves, you can't go wrong with an autowatch ghost immobiliser. The device prevents your vehicle from starting when someone copies or steals your key. This is due to its advanced technology that is designed to stop the engine from starting until the correct PIN code is entered.
The device is connected to the vehicle's bus network CAN and allows direct communication with the ECU. It uses the buttons on your steering wheel and dashboard to create a unique sequence, that only you can understand. This makes it impossible for anyone else to start your vehicle. This is the ultimate security system that will safeguard your car's pride and joy and preserve its value in the event that you decide to sell it in the future.
Installing a ghost immobiliser is an easy procedure, but it is crucial to follow the steps carefully to avoid electrical issues and system malfunctions. First, you need to locate and identify a constant 12V power source as well as a good grounding point on the chassis of your vehicle. After that, you can begin connecting the wires for the immobiliser. Use high-quality connectors, and soldering techniques for a secure connection. Connect the connections with heat shrink tubing or insulation tape, or other materials to avoid electrical short circuits.
After the wires have been connected, you can reconnect the battery and start the engine to test the immobiliser's function. If everything is functioning properly you can place it in a secure place under the dash or somewhere else in the vehicle. Make sure you hide it well to prevent thieves from getting into it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified This means it is in compliance with the highest standards of security and is an excellent protection against car thieves. It is impervious to key cloning and hacking and cannot be disabled without the code. The device is also simple to use and can be put into the service valet mode to ensure that your vehicle isn't activated if you bring it in for service or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system specifically designed to deter theft of vehicles. It connects directly to the vehicle's CAN bus network and communicates with the ECU, making it a virtually undetectable addition to your car. The Ghost Immobiliser will not interfere with the factory settings of your vehicle unlike other aftermarket systems that require the removal of circuit elements.
It's also completely undetectable to thieves using diagnostic scanning devices. The system doesn't transmit or receive radio frequency signals and instead uses CAN data for communication with your ECU. In addition, it doesn't need any modification to your car's existing key fobs.
Enter the sequence to disarm (either two or one button) and then turn on the ignition of your car to activate Ghost Immobiliser. The indicator will flash twice to verify that you have entered the correct code. You can now begin driving your car in a safe manner.
Once installed Once installed, the Ghost Immobiliser will safeguard your vehicle from hacking and key cloning, while protecting the value of your pride and joy. If you have to hand over your vehicle for service or valet parking The Ghost Immobiliser can be temporarily disabled in Transport Mode.
You'll require a constant power source (12V) as well as a grounding point to complete the installation of a Ghost immobiliser. Ensure that these are both well-insulated and safe to touch. It's also recommended to use cable ties to tie and secure the wires, since this reduces the risk of tampering by potential thieves. Make sure you check the exact location of these points to avoid mistakes, and mark them with a piece of tape or label. It's recommended to check all connections for signs wear and tear. Connections that are loose can cause problems with the system, so be certain that they are securely fixed and well-insulated. Don't forget to test your Ghost Immobiliser after installation has been completed. This will ensure that the unit functions properly and that all connections and insulation are safe. Be sure to fix any issues immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that integrates seamlessly with your vehicle's ECU to prevent the motor from starting without authorization. Its cutting-edge technology safeguards your vehicle from key cloning and hacking and other common tactics that thieves employ to steal vehicles. The Ghost works in conjunction with existing tracking and alarm systems to offer the ultimate security for your vehicle. This system's unmatched features and discreet design make it a popular option for car enthusiasts and security-conscious drivers too.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow every step of the installation process. Refer to the wiring diagram of your vehicle as it will aid you in locating and connecting the wires. You'll need to determine the power and grounding sources. Once you've located them, you'll be required to mark the points so that they are easy to locate when installing. Finally, it's vital to use only the best tools and materials. Basic hand tools can assist with making precise connections while a multimeter can verify electrical values and ensure security. Cable tie and insulation tape will ensure that all connections are tidy. A Ghost-specific user's manual is also available.
Before proceeding with the installation it is important to test the system by entering the PIN code, then starting the vehicle. This will ensure that the immobiliser works as intended and stop unauthorised vehicle starts. It is recommended that you perform this procedure regularly as part of your regular vehicle inspections to ensure that the system is always functioning correctly.
After the installation is completed Once the installation is complete, you can drive your vehicle with confidence. The Ghost will help keep your precious possessions safe from potential thieves and ensure that no one can escape with your car without the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that detects any attempts at theft or tampering. This allows you to track your car in the event that it's stolen.
The Ghost is compatible with a wide variety of vehicles, including those from all major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this cutting edge device. Contact us today to find out more about our services and installation options. We are a TASSA Installer who is registered This certification ensures that we follow strict guidelines and procedures for installing our products. This assures customers, insurance companies and law enforcement agencies that all installations are completed safely and correctly.